Rotary Retort for secondary sterilization

Rotary Retort(full automatic shower rotary retort,retort sterilizer) Secondary sterilizer material: SUS304

 Rotary Retort(full automatic shower rotary retort,retort sterilizer)

Charavteristics of the equipment

1  Uniform heat distribition, non dead angle

The circulating water in the retort continuosly flows  toward the up, down ,left and right direction, thus make sure that every point in the retort get the same temperature during the heating , temperature preservation and cooling process.Therefore , the packed food in different position of baskets will be heated uniformly , effectively preventing the dead angle in the sterilization processing , which make sure the unifomity of temperature and heat exchange, Lowering the possibilities of over cooking and guaranteeing accurate F value..

2  High temperature and short time sterilization

This equipment adopts the double tank cycled hot water to sterilize. First , heating up the water to the requiped temperature  in advance (except the multi period sterilization), will shorten the sterilization time and obtain higher efficiency.

3  High sterilizating temperature

Adopt the latest technology , this equipment unilize hot water recyling to sterilize. During the sterilization processing , all the data about temperature pressure, steriliazation time, water and air are automatically controlled. The temperature is correct(with a error less than 0.5)

4  Energy saving

The medium water used during the sterilization can be used repeatedly , thus saving the energy ,time , manpower and materials , reducing the whole production cost.

5  Fully automated system

AControlling through the touching screen and PLC

B Controlled by the digital reactor and auto value during all the period

C Can fulfill the multi period sterilization according to the technical requirement.

DPressure and temperature digitally displayed

E All the processing being recorded to the disks.

F There are various sterilization modes pre stored for choosem, to a maximum of 250 sterilization formulas.

GThe Retor adopts the analog temperature controlled system ,you can set multi period heating mode

According to different requirements of different food products ,you can set different heating  and cooling processing , as well as use the multi period heating sterilization mode and twice cooling mode

HF value measuring function

Each set of water bath Retort could be equiped with the F value measuring function.Being treated by the data processing  software, all the sterilization data, including sterilization function condition , F value , time-temperarure chart and time-presssure chart will be saved or printed, which  offers convenience to production management.

6  The rotary Retor adopts the pneumatic pressed sets, guaranteeing the saftey of food product as well as maintaining the equipments function.

Note :*means it is optional.

Items	Units
Diameter of the pot body	mm	3100	1500
Number of baskets		4	4
Maximum working pressure	Mpa	0.35	0.35
Maximum working temperature		137	137
Revolving velocity	r/min	3-8	3-8
Steam pressure	MPa	0.6	0.6
Steam consumption	Kg/cycle	300	380
Cooling water consumption	MPa	0.3	0.3
Consumption of cooling water	M3/	5~10	8~12
Compressed air consumption	M3/min	0.6~1.0	0.8~1.2
Electrical capacity	KW	13	15
Dimension	LxWxH(mm)	560x2100x3700	5600x2200x4100

Rotary Retort for secondary sterilization